Do you know what Emulsification Pump is? Where is it used? In fact, the emulsifier is widely used, with functions such as rapid homogenization emulsification, heating, cooling, vacuum degassing, and discharging. Therefore, it is favored by everyone. However, there are many things to pay attention to when using it, such as daily maintenance. Let's take a look at its maintenance methods.

Although the emulsifier has many advantages when it is used, it is the same as other equipment and needs to be well maintained. Therefore, in order to maintain the working efficiency and product quality of the emulsifier in production, and to extend the service life of the emulsifier, the emulsifier must be used and maintained in a standardized daily manner. If you didn't pay attention to these tasks before, you should pay attention to them now. What the staff needs to know here is to do a good job of daily cleaning and sanitation of the emulsifier. Maintenance of electrical equipment. It is necessary to ensure that the equipment and electrical control system are clean and hygienic. At the same time, it is also necessary to do a good job of moisture and corrosion prevention. These are all very important tasks. In addition, the staff also need to know that the emulsifier inverter should do a good job of ventilation, dust removal and other heat dissipation. Because if you don't do it well in this regard, it may have a great impact on the electrical equipment, and in serious cases, it may even burn the emulsifier equipment. In order to avoid such things, pay more attention when doing maintenance.

In addition, in the maintenance and maintenance of the emulsifier, users also need to check the heating system. When the safety valve is checked regularly, the purpose of doing so is to prevent the valve from rusting and failing, and the steam trap is checked regularly to prevent clogging by debris. The vacuum system of the emulsifier should also be checked by hand. Because the vacuum system, especially the water ring vacuum pump, sometimes rusts or has debris during use. If it is not cleaned, the rotor will be stuck and the motor will burn. Here we recommend that you check for any blockage during daily maintenance. If you find this situation, you still have to solve it. Second, its water ring system must be kept unobstructed. Because if there is a blockage when starting the vacuum pump during use, the vacuum pump should be stopped immediately. At this time, you have to clean the vacuum pump before starting it again. The sealing system of the emulsifier should also be well maintained. Because the emulsifier has many seals, and the mechanical seal inside it needs to replace the dynamic and static rings regularly. The period is the frequent use of the equipment, so it is still necessary to check the cooling system frequently to avoid cooling failure and burning of the mechanical seal.

You can also consult us at any time about the knowledge points of the emulsifier. I hope you can learn these maintenance methods mentioned in the content. Here, we welcome domestic and foreign merchants to visit our company for inspection, negotiation and ordering, and we also hope that more friends will come to our company for in-depth exchanges and cooperation in all aspects.