Introduction

Emulsification Pump is a device that can quickly and evenly put one or more phases (liquid, solid, gas) into other insoluble persistent phases (usually liquid). Generally speaking, the phase difference is compatible with each other. When the high shear homogenizing pump inputs external kinetic energy, the two raw materials are rearranged into symmetrical phases. Due to the high speed and high-frequency mechanical effect of the motor rotor, the emulsification pump produces obvious mechanical and hydraulic cutting machines, centrifugal extrusion and oil layer friction in the narrow gap between the motor rotor. Mixed liquid (solid/liquid), moisturizing emulsion (liquid/liquid), foam (gas/liquid), such as tearing and leakage caused by collision.

Emulsification pump According to the whole process of the corresponding steam after fusion and the effect of reasonable additives, the HEC mixing homogenizing pump is instantly evenly distributed, and the demulsified insoluble solid phase, high-efficiency liquid phase and gas phase spectrum are finely dispersed, and the high-frequency emulsification pump is manufactured in time. Repeated motion can obtain stable and high-quality products.

The principle of the emulsification pump is the power device of the emulsification pump. The key is to use the electric support point to convert electromagnetic energy into thrust for high-speed operation of the rolling bearing. The high-speed operation of the rolling bearing forms a strong shear stress, crushing the goods that need to be mixed. The oil painting is discharged from the bottom of the emulsification pump.

Construction structure

The pump body is mainly composed of the outside of the pump cavity and the inside of the pump cavity. The main material used for the outside of the pump cavity is the stainless steel model SS316 or SS304 product, which has strong wear resistance and is not easy to rust. The structure inside the pump steel is also composed of stainless steel material, which is more corrosive and wear-resistant than the outside. This can better subdivide the oxidizing liquid without damaging the pump body.

Application field

The emulsification pump can be used for continuous emulsification or dispersion of multiphase liquid media, and has a conveying effect on liquid media with lower viscosity. Powders can also be obtained, and liquids are continuously mixed in proportion. It is widely used in daily chemicals, food, medicine, chemicals, petroleum, coatings, nanomaterials and other fields.

The above is a basic overview of the "Efficacy and Principle of Emulsification Pumps". Please refer to it by yourself. If you have any questions, you can directly consult us or follow us. If you think the article is good, you can also collect it directly.