High Shear Emulsifier is a complete system that integrates mixing, dispersing, homogenizing, emulsifying and powder suction. It consists of a water phase pot, an oil phase pot, an emulsifying stirring pot, a vacuum system, a hydraulic system, a pouring system, an electronic control system, a working platform, etc. It is widely used in cosmetics production. Supports non-standard customization. Here are the key points to note when customizing the vacuum homogenizing emulsifier for cosmetics equipment.

1. Customers can preliminarily determine the capacity, size, material, homogenization method, control system, main pot configuration, etc. of the emulsifier based on their own production, industry hygiene requirements, product process, operation mode, plant area, etc.

2. Customizing the emulsifier should pay more attention to the core of the vacuum homogenizing emulsifier---the emulsifying head. Because the vacuum homogenizing emulsifier for cosmetics equipment is a complex mechanical equipment, its customization can be multifaceted. The emulsifying head is the core of the equipment. The rotor and stator of the core components of the vacuum homogenizing emulsifier are of German technology homogenizing structure and imported double-end mechanical sealing effect. The emulsification speed can reach 4500 rpm and the high shear fineness can reach 0.2-5μm. After the comprehensive effects of centrifugal extrusion, impact and tearing, it produces delicate, stable and high-quality products.

From the working principle, the emulsifier needs the cooperation of the rotor and the stator to achieve the emulsification effect of the material. The emulsifying head is an important component that determines the function of the high shear emulsifier. The design of the stator and rotor determines the scope of application of the emulsifier.

1. Claw stator head: bidirectional suction method, which is universal. A bidirectional hyperbolic large circulation vortex is formed in the container, which avoids the dead corner caused by the difficulty of inhaling the material on the upper part of the kettle, and the emulsification and homogenization are more thorough.

2. Long hole stator head: suitable for the rapid crushing of medium solid particles and the mixing of medium viscosity liquids. The long hole provides area and good circulation for surface shearing.

3. Mesh stator head: suitable for mixing low-viscosity liquids. Its shear rate is suitable for the preparation of emulsions and the crushing and dissolution of small particles in liquids.

4. Round hole stator head: suitable for general mixing or crushing of large particles. The round openings on this stator head provide circulation in all stators, which is suitable for processing materials with higher viscosity.