The impeller is driven magnetically and does not require a bearing through the tank wall to drive the impeller. This eliminates the possibility of leakage from the shaft seal. At the same time, no shaft seal maintenance is required. The open structure of the impeller represents an important improvement in the design of magnetically driven agitators.

• It completely avoids the presence of internal bubbles
• The CIP online cleaning process is safer and more effective
• The SIP online steam sterilization process is simpler
• All liquid contact surfaces can be fully drained
• Bottom installation: low liquid level mixing, easy maintenance
• Magnetic drive: no mechanical seal, reduced risk of contamination
• Excellent stirring performance

The MT magnetic stirrer is designed according to GMP-requirements.

The MT magnetic stirrer design represents the culmination of more than 25 years of engineering and design experience for this equipment.

The concept of aseptic design, the basis of the MT magnetic stirrer, will greatly increase the applicability, cleanability and sterilization of the stirring process.

Impeller replacement
High shear and low shear impellers can be replaced with each other according to material requirements

Low speed low shear force agitator

There are 8 specifications for selection according to different capacities

Low shear force, speed 50-800RPM

Used for ordinary liquids, chemical reaction stirring

Suitable for stirring shear-sensitive materials at low speed

 High-speed high-shear impeller
Aseptic design
Speed ​​up to 1400-2800RPM
Suitable for poorly soluble media, such as emulsion dissolution, small particle solid dissolution

Dimensions